AMMCO 700 - User Manual

1601 J. P. Hennessy Drive, LaVergne, TN USA 37086-3565 615/641-7533 800/688-6359 Manual Part No.: 927588 16
HENNESSY INDUSTRIES INC. Manufacturer of AMMCO
®
, COATS
®
and BADA
®
Automotive Service Equipment and Tools. Revision: 06/01
Installation Instructions
Operating Instructions
Safety Instructions
Maintenance Instructions
READ these instructions before placing unit in
service. KEEP these and other materials delivered
with the unit in a binder near the machine for
ease of reference by supervisors and operators.
700/705/710
Vehicle Mounted
Brake Lathe &
Rotor Driving Unit
®

Summary

Safety

Safety Notices and Decals

Read and understand all safety notices and decals included on the unit and in the manual.

Warning

Equipment may produce arcs/sparks; locate in a room or enclosure, or at least 18" above floor to minimize ignition risk.

Cautions and Dangers

Details eye/face protection, safety equipment, proper mounting, attire, and lathe overload precautions.

Owners Responsibility

Definitions of Hazard Levels

IMPORTANT SAFETY INSTRUCTIONS

General safety precautions for operating garage equipment, including guards, tools, attire, and electrical safety.

Brake Lathe Operation

Reconditioning Disc Brake Rotors

Procedure for inspecting and preparing brake rotors for machining, including checking for scoring and thickness.

Depth-Of-Cut Micrometer Dials

Vehicle Preparation

Lathe Mounting Procedures

Guidance on positioning and attaching the brake lathe to the vehicle's caliper mounting bracket.

Use of Mounting Hardware

Details on using caliper bolts or provided mounting bolts with spacers and washers for lathe attachment.

Installation with the Vehicles Caliper Bolts

Installation With Mounting Bolts Supplied in Mounting Hardware

Set-Up and Machining

Procedures for setting up the lathe and preparing for the rotor machining process.

Restoring Vehicle

Rotor Drive Unit Operation

AMMCO 700 Specifications

General

Brand	AMMCO
Model	700
Category	Lathe
Language	English