AMMCO 3860 User Manual

1601 J. P. Hennessy Drive, LaVergne, TN USA 37086-3565 615/641-7533 800/688-6359 Manual Part No.: 929250 09
HENNESSY INDUSTRIES INC. Manufacturer of AMMCO
®
, COATS
®
and BADA
®
Automotive Service Equipment and Tools. Revision: 05/01
3850, 3860
Drum & Disc
Brake Lathes
®
Installation Instructions
Operating Instructions
Safety Instructions
Maintenance Instructions
READ these instructions before placing unit in
service. KEEP these and other materials delivered
with the unit in a binder near the machine for
ease of reference by supervisors and operators.

AMMCO 3860 Specifications

General

Brand	AMMCO
Model	3860
Category	Lathe
Language	English

Summary

Safety Instructions

Safety Notices and Decals

Explains the importance and location of safety notices and decals on the unit.

General Warnings and Cautions

Lists critical warnings and cautions to prevent hazards during operation.

Comprehensive Safety Guidelines

Provides detailed instructions for safe operation, maintenance, and general use.

Before You Begin

Electrical Requirements

Unit Installation

Step-by-step guide for assembling and securing the brake lathe.

Operating Instructions

Lathe Startup Procedure

Feed Drive Direction Selection

Arbor Installation and Alignment

Detailed steps for correctly installing and aligning the arbor for accurate machining.

Mounting Brake Drums

Brake Drum Reconditioning Process

Step-by-step instructions for machining brake drums to specifications.

Mounting Brake Rotors

Brake Rotor Reconditioning Process

Step-by-step guide for machining brake rotors using the twin cutter setup.

Maintenance and Service

Lubrication Procedures

Cleaning the Lathe and Work Area

Arbor and Adapter Care Guidelines

Gib Adjustment for Smooth Operation