AMMCO 4100 - User Manual

1601 J. P. Hennessy Drive, LaVergne, TN USA 37086-3565 615/641-7533 800/688-6359 Manual Part No.: 911005 51
HENNESSY INDUSTRIES INC. Manufacturer of AMMCO
®
, COATS
®
and BADA
®
Automotive Service Equipment and Tools. Revision: 10/12
3000, 4000,
4100, 7500
Drum & Disc
Brake Lathes
®
Installation Instructions
Operating Instructions
Safety Instructions
Maintenance Instructions
READ these instructions before placing unit in
service. KEEP these and other materials delivered
with the unit in a binder near the machine for
ease of reference by supervisors and operators.

Summary

Safety and Responsibilities

Definitions of Hazard Levels

Understand signal words and hazard level definitions for safe operation.

Owners Responsibility

Safety Notices and Decals

Read and understand safety notices and decals on the unit.

Important Safety Instructions

Essential safety precautions for operating garage equipment.

Setup and Specifications

Installation

Steps for assembling the bench and mounting the lathe.

Reconditioning Brake Drums

Mounting Drums

Securely mount brake drums onto the arbor.

Reconditioning Disc Brake Rotors

Twin Cutters

Mounting and preparing the twin cutter for simultaneous rotor machining.

Model 7900 Twin Cutter - 4100

Installation

Preparation

Rotor Mounting

Set Up and Reconditioning Rotors

Positioning tool bars and performing rotor resurfacing with the 7900 twin cutter.

AMMCO 4100 Specifications

General

Brand	AMMCO
Model	4100
Category	Lathe
Language	English