AMMCO 4000E User Manual

1601 J. P. Hennessy Drive, LaVergne, TN USA 37086-3565 615/641-7533 800/688-6359 Manual Part No.: 95000103 00
HENNESSY INDUSTRIES INC. Manufacturer of AMMCO
®
, COATS
®
and BADA
®
Automotive Service Equipment and Tools. Revision: 02/08
4000E
Drum & Disc
Brake Lathe
®
READ these instructions before placing unit in
service. KEEP these and other materials delivered
with the unit in a binder near the machine for
ease of reference by supervisors and operators.
* Brake lathe shown on
bench with sign, toolboard
and accessories.
Installation Instructions
Operating Instructions
Safety Instructions
Maintenance Instructions

AMMCO 4000E Specifications

General

Brand	AMMCO
Model	4000E
Category	Lathe
Language	English

Summary

IMPORTANT SAFETY INSTRUCTIONS

General Safety Precautions

Covers essential precautions for safe operation, maintenance, and workplace conduct.

Basic Operation

Spindle and Feed Rate Control

Explains spindle speed adjustment, jog function, and feed rate settings for machining.

Reconditioning Disc Brake Rotors

Rotor Preparation and Measurement

Steps for inspecting rotors for wear, damage, and measuring thickness for reconditioning.

Twin Cutter Setup and Installation

Reconditioning Brake Drums

Brake Drum Preparation and Mounting

Drum Silencer Band and Cross Feed Setup

Installation Instructions

Electrical Requirements and Specifications

Outlines the lathe's electrical needs, grounding, and key operating specifications.