AMMCO 710 - User Manual

1601 J. P. Hennessy Drive, LaVergne, TN USA 37086-3565 615/641-7533 800/688-6359 Manual Part No.: 927588 16
HENNESSY INDUSTRIES INC. Manufacturer of AMMCO
®
, COATS
®
and BADA
®
Automotive Service Equipment and Tools. Revision: 06/01
Installation Instructions
Operating Instructions
Safety Instructions
Maintenance Instructions
READ these instructions before placing unit in
service. KEEP these and other materials delivered
with the unit in a binder near the machine for
ease of reference by supervisors and operators.
700/705/710
Vehicle Mounted
Brake Lathe &
Rotor Driving Unit
®

Summary

Safety Notices and Decals

Warning

Provides critical warnings regarding equipment operation and potential hazards.

Cautions and Dangers

Details important cautions and potential dangers associated with using the equipment.

Owners Responsibility

Outlines the owner's duties for maintaining machine and user safety.

Definitions of Hazard Levels

Explains hazard levels (Danger, Warning, Caution) used in the manual.

IMPORTANT SAFETY INSTRUCTIONS

Brake Lathe Operation

Depth-Of-Cut Micrometer Dials

Explains the function and calibration of the depth-of-cut micrometer dials.

Vehicle Preparation

Lathe Mounting Procedures

Use of Mounting Hardware

Installation with the Vehicles Caliper Bolts

Installation With Mounting Bolts Supplied in Mounting Hardware

Set-Up and Machining

Maintenance and Service

Oiling

Cleaning

Gib Adjustment

Care of Adapter

Pivot Adjustment

Electrical Wiring Requirements

Assembly Instructions

Mounting of Lug Adapter

Rotor Drive Unit Operation

AMMCO 710 Specifications

General

Brand	AMMCO
Model	710
Category	Lathe
Language	English