What to do if the AMOT G Series Control Unit valve is oscillating?
If the valve is oscillating or moving in large steps, you can try the following: adjust PID values, adjust dead band settings, move the temperature sensor, adjust the deadband setting, adjust gears or pulleys, or replace the pin.
What to do if AMOT Control Unit valve drives in only one direction?
If the valve drives in one direction only, consider replacing the relay or adjusting the position feedback sensor.
What to do if AMOT Control Unit valve will not drive in either direction?
If the valve will not drive in either direction: if the motor is running, replace the shear pin between the valve and actuator or ensure the local power supply is compatible with the nameplate voltage and current rating.
General| Brand | AMOT |
|---|---|
| Model | G Series |
| Category | Control Unit |
| Language | English |
To Next Page
