AMOT G Series - Typical Applications

10
System Overview
Rev 5 – MAY 2019 OMMGGP00185
2.1.2 Typical Applications
Lubricating Oil Temperature Control
Lubrication oil temperature control is
normally configured in a mixing application
controlling the return temperature to the
heat load.
The temperature is normally measured as
close as possible to the sump return.
Jacket Water Cooling
Jacket water cooling in diverting
applications regulates the outlet coolant
water temperature from a diesel or gas
engine. The valve either sends water to a
cooler or bypass loop, accurately
maintaining the temperature.
The temperature is normally measured at
the outlet from the heat source.
Charge Air Temperature Control
The intercooler is used to cool high
temperature turbo charger air. In this
application, the G Valve regulates the flow
of cooling water through an intercooler,
which can increase efficiency, enhance
performance and help meet stringent
environmental requirements
Central Cooling
For large flow central cooling, mixing or
diverting applications where accurate
temperature control is required. The
capabilities of the G Valve provide the ideal
solution.