Ampeg BA-108 User Manual

BA Series Bass Guitar Combo
11
BA-110 TECHNICAL SPECIFICATIONS
Output Power Rating 30 watts @ 4 ohms, 10% THD+N
Signal to Noise Ratio 76 dB (20 Hz–20 kHz, unweighted)
Maximum Gain @ 1 kHz Input: 54 dB
Tone Controls Bass: +18/–20 dB @ 40 Hz
Mid: +14/–15 dB @ 500 Hz
Treble: +15/–15 dB @ 4 kHz
Speaker Specs 1 x 10" speaker: 4 ohms
Maximum Operating Range 40 ˚C ambient temperature, 93% relative humidity,
up to 2000 m altitude
Power Requirements 100 VAC~ 50/60 Hz, 35W
120 VAC~ 60 Hz, 35W
220 VAC~ 50/60 Hz, 35W
240 VAC~ 50/60 Hz, 35W
Size (H x W x D) 18.8 in x 16.0 in x 13.0 in
478 mm x 406 mm x 330 mm
Weight 33 lb / 15.0 kg (approximately)
SCRAMBLER
POWER
AMPLIFIER
BYPASS
DRIVE
MIX VOLUME
BASS
MIDRANGE
TREBLE
TONE CONTROL CIRCUITRY
AUX Inputs
PHONES
AUX LEVEL
30 W
Mono 1/4”
STEREO1/8”
Stereo1/8”
10” WOOFER
4 OHM
INPUT
FET
PREAMP
LIMITER
MUTE

Ampeg BA-108 Specifications

General

Type	Bass Combo Amplifier
Power Output	25 Watts
Speaker Size	8 inches
Speaker	1 x 8" Custom Ampeg Speaker
Tone Controls	3-Band EQ
Inputs	1 x 1/4" Instrument
Headphone Output	1 x 1/8"
Aux Input	1 x 1/8"
Controls	Volume, Bass, Treble