Ampeg Micro-VR Quick Start Guide

MICRO-VR
Output Power Rating
150W RMS @ 8 (5% THD)
200W RMS @ 4 (5% THD)
Signal-to-Noise 72 dB (20 Hz - 20 kHz, unweighted)
Maximum Gain 62 dB @ Tone controls centered
Power Requirements
100 - 120V AC, 50 - 60 Hz, 150W
220 - 240V AC, 50 - 60 Hz, 150W
Size (H x W x D)
7.5 x 12 x 10 in
190 x 305 x 254 mm
Weight
9.9 lb
4.5 kg
All specifications subject to change
Technical Specifications
5
WARRANTY AND SUPPORT
Visit WWW.AMPEG.COM to...
(1) ...identify WARRANTY coverage provided in your local market. Please keep your sales
receipt in a safe place.
(2) ...retrieve a full-version, printable OWNER’S MANUAL (English only) for your product.
(3) ...REGISTER your product.
(4) ...CONTACT Technical Support, or call 818-575-3600.
www.ampeg.com
Yamaha Guitar Group, Inc.
26580 Agoura Road, Calabasas, CA 91302-1921 USA
Part No. 40-00-0434 Rev. A
© 2019 Yamaha Guitar Group, Inc. All rights reserved.
Ampeg, the Ampeg logo, and SVT are trademarks or registered trademarks of Yamaha Guitar Group, Inc. in the U.S. and/or other jurisdictions.

Ampeg Micro-VR Specifications

Power Output

output power rating at 8 Ω	150 Watts RMS
output power rating at 4 Ω	200 Watts RMS

Signal and Gain

signal to noise ratio	72 dB
maximum gain	62 dB

Tone Controls

bass control	+14/–12 dB @ 40 Hz
midrange control	+5/–13 dB @ 500 Hz
treble control	+19/–25 dB @ 8 kHz

Power Requirements

power requirement for 100–120 VAC	150 W
power requirement for 220–240 VAC	150 W
frequency	50–60 Hz

Weight and Dimensions

size (H x W x D) in inches	7.5 in x 12 in x 10 in
size (H x W x D) in millimeters	190 mm x 305 mm x 254 mm
weight in pounds	9.9 lb
weight in kilograms	4.5 kg