Need help?Do you have a question about the Amphenol PL183 30 Series and is the answer not in the manual?
Prepare cable by selecting and cutting to the right size according to production plan from Table 1.
Assemble cable with end cap, sealing, metal gasket, and inside copper ring in sequence.
Strip cable insulation and jacket according to sizes specified in Table 2.
Recommendations for using plug dust cover and protective cover during handling to prevent damage.
General| Shell Plating | Nickel |
|---|---|
| Polarization | Keyed |
| Voltage Rating | 500 V |
| Contact Termination | Solder |
| Impedance | 50 Ohms |
To Next Page