Amplink PDM60 User Manual

Page 1 of 12
User Manual
The Amplink PDM is built on the strong reputation of the original PDM60 with added and improved
features to make 12V power distribution even easier.
Table of Contents
Package Contents
2
Specifications
2
Device Overview
3
Installation Basics
4
Amplink PDM App
4
App Connection Instructions
5
App Connection Troubleshooting
8
App Overview
9
Wiring and App Setup Example 1
10
Wiring and App Setup Example 2
11

Amplink PDM60 Specifications

General

Channels	6
Output Voltage	12V DC
Certifications	CE, RoHS
Operating Temperature Range	-40°C to 85°C
Protection Features	Overcurrent, Overvoltage, Short Circuit, Thermal

Summary

Package Contents

Specifications

Device Overview

Installation Basics

Amplink PDM App

App Connection Instructions

App Connection Troubleshooting

App Overview

Monitor

This page allows monitoring of the Amplink device's current state. Colored bars match wire colors, indicating output status (ON, Fault, OFF).

Triggers

This page configures input triggers. At least one trigger must be active and set to Voltage (+ve) or Ground (-ve).

Setup

This page allows changes to output settings like name, amp limit, delay, and trigger logic (AND/OR).

Wiring and App Setup Example 1

Wiring and App Setup Example 2

Warranty Policy