Amprobe AMP-25 - Measurement Functions and Controls; Power Button and Backlight Control

6
UNPACKING AND INSPECTION
Your shipping carton should include:
1 Clamp meter
2 1.5 V LR44 batteries (installed)
1 Carrying case
1 User manual
If any of these items are damaged or missing, return
the complete package to the place of purchase for an
exchange.
MEASUREMENTS
W Warning
To avoid possible electric shock or personal injury:
• To avoid electric shock or personal injury:
• When measuring current, center the conductor in the
clamp.
• Keep fingers behind Tactile Barrier.
• Use the proper function for measurements.
Button Description
Press button to turn ON the meter (the
default is auto AC/DC A mode). Press > one
second to turn OFF.
Press
Press
OFF
>1 Sec
Press button to turn ON or to turn OFF
LCD backlight. The backlight automatically
turns OFF after approximately 30 seconds.
Press