5
• Meter detects faulty wiring in need of repair
without removing outlets cover plates, or panel
covers:
• Faulty splices and connections
• Incorrect wiring
• Undersized wiring
• Faulty GFCIs,
• Faulty or incorrectly wired AFCIs
• Incorrect line voltage
• Poor ground quality
• User selectable 10,15 and 20 amps loads to verify
performance of the electrical system
• Incorrect wiring or voltage drop test failure is
clearly indicated by flashing screen
• Will not trip circuit breakers or blow fuses
during the test
• Tests GFCI and AFCI operations
• Check ground quality for safety and ability to
support sensitive electronic equipment
• Measure fault currents
• Save money and time by eliminating guess work.
NOTE: The Inspector™ 3 does not check the
condition of wiring insulation.
To Next Page
Loading...
