4
UNPACKING AND INSPECTION
Your shipping carton should include:
1 INSP-3 Wiring Inspection Tester
1 Power Cord
1 9V Alkaline Battery (Installed)
1 Users Manual
1 Carrying Case
If any of the items are damaged or missing, return
the complete package to the place of purchase for an
exchange.
INTRODUCTION
The INSP-3, wiring inspector is a rugged tester
designed to verify building wiring compliance to
electrical code, especially voltage drop under load.
Identify issues with splices, connections and conductor
quality, crucial to safety and performance of the
electrical system.
Features
• Testing efficiency - relevant test data (voltage,
voltage drop, hot and neutral voltage drop,
voltage with load, ground impedance) is
presented on a single large display to save
operator time - no scrolling or switching screens
needed
• Verifies if wiring is tested for load
carrying ability that meets electrical code
recommendations for voltage drop under load
To Next Page
Loading...
