Amprobe INSP-3 - Page 20

14
1
121.5V Drop@15A=3.9%
(1.5% Hot + 2.4% Neut)
Loaded Voltage=118.0
Push GFCI to trip
GFCI Breaker Test
Testing at 6mA
GFCI Breaker Test
GFCI Test passed at
6mA in 1.2 Seconds
GFCI Breaker Test
GFCI Test passed at
30mA in 1.5 Seconds
GFCI Breaker Test
Failed 6mA Test
Testing at 30mA
GFCI Breaker Test
Failed 6mA Test
Failed 30mATest
GFCI Test Failed
Draws up to eight 120A
pulses within half period
AFCI Test passed
AFCI Test Failed
Volt Drop@15A=3.9%
(1.5% Hot + 2.4% Neut)
Loaded Voltage=116.8
Push AFCI to trip
121.5 Vrms
60 Hz
Fig.4
Fig.5