- 21 -
menu in Video Playback Mode.
8.6 System Setup
8.6.1 Language
The default setting is English. If the system is not in your
language, please find the icon or in settings to
change the language. There are also other language
available, including French, Italian, German, Spanish,
Korean, Chinese (Traditional), Simplified Chinese
(Simplified), Russian, Japanese and etc.
8.6.2 Time & Date
If you want to change the system time and date, please
go and find the option named “Date” or “Date/Time” in
settings.
For Sentry Only (Novatek chip)
1. Press MENU button twice to enter the second page
of settings;
2. Select “Date/Time” and press OK button to enter;
3. Press UP or DOWN to change the date and time, and
press OK to move to next time unit;
4. Press MENU button to save and exit.
- 22 -
For Sentry with Rear Camera (JL chip)
1. Press MENU button to enter the settings page;
2. Select “Date” and press OK button to enter;
3. Press UP or DOWN to change the date and time, and
press MODE SWITCH button (under OK) move to
next time unit;
4. Press OK button (Not MENU) to save and exit.
8.6.3 Time Watermark (Date Stamp)
The default setting is NO stamp or watermark. If you want
to stamp on the video, please go to the option named
“Time watermark” or “Date stamp” in settings and turn it.
8.6.4 Screen Saver
The default setting is OFF.
For Sentry Only (Novatek chip)
You can enter “Screen Saver” in the second page of
settings to change it to 3 mins, 5 mins, 10 mins or OFF.
For Sentry with Rear Camera (JL chip)
You can go to settings and enter “Screen Timeout” to
change it to 10s, 20s, 30s or OFF.
To Next Page
Loading...
