Amroad VP115 - Advanced Settings

AMROAD VP115
VIDEO SETTINGS
This section contains 6 parameters that you may use to adjust video streaming and quality.
ITEM
DESCRIPTION
Video This item allows you enable or disable video streaming. Phone calls will be
voice only if “Off” is selected.
Color This item allows you to adjust color balance of the camera module. There
are 4 options: Yellow Lamps, Orange Lamps, Deep Red Light and
Fluorescent Light. Please select a suitable one to meet your room lighting
environment. Default setting is Yellow Lamps.
Brightness This item allows you to adjust brightness of the camera module. There are
10 levels, from 0 to 9. Higher number gives brighter image. Default setting
is 2.
Lightness This item allows you to adjust lightness of LCD panel. There are 10 levels,
from 0 to 9. Default setting is 9.
Power Freq. This item allows you to select the power frequency according to your local
power specifications. There are 2 options: 60Hz and 50Hz. Please check
with your local power company if you are not sure the correct value.
AUDIO SETTINGS
ITEM
DESCRIPTION
Handset Vol This item allows you to set volume of handset. There are 10 levels: 0 ~ 9.
Default setting is 7.
Speaker Vol This item allows you to set volume of speaker. There are 10 levels, 0 ~ 9.
Default setting is 4.
Ringer Vol This item allows you to set volume of ring tone. There are 10 levels, 0 ~ 9.
Default setting is 5.
PSTN HS Vol
This allows you to set volume of Handset in PSTN mode.
PSTN HF Vol This allows you to set volume of the speaker after you press Speaker
button.
29