AMROAD VP115
USE of SIP
SIP, initial of Session-Initiation-Protocol, it is an application-layer control (signaling) protocol
for creating, modifying, and terminating sessions with one or more participants. These sessions
include Internet telephone calls, multimedia distribution, and multimedia conferences. Simply
say, SIP is a most commonly used protocol that used to interconnect SIP Enabled PBX and/or
SIP User Agents to each other to establish voice and video sessions between each other over an
IP Network.
There are few typical applications of SIP products, please refer to diagram right:
Make a video phone call from VP115 to another Video Phone through the network.
Make a video phone call from software on laptop to VP115.
2
To Next Page
Loading...
