EasyManua.ls Logo

Amroad VP115 - SIP Services

Amroad VP115
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AMROAD VP115
NETWORK SETTINGS
ITEM
DESCRIPTION
IP Type This item allows you to select type of IP address of this device. There are 3
options: DHCP Client, Fixed IP and PPPoE:
1. DHCP Client - If you want to connect this device to a exist network
and get dynamic IP address from the DHCP server, please select this
item. You will see all other items in this mode are grayed out. In most
of cases, DHCP Client is used for connecting LAN
(Local-Area-Network).
2. Fixed IP - If you want to use fixed IP address to connect to network,
you may select this one. You may get Fixed IP when you applying SIP
service from carriers or operators. You will see last 2 items for PPPoE
are grayed out. Please follow instructions below to setup other
parameters for Fixed IP.
3. PPPoE - This selection is for connecting ADSL modem directly. Your
phone will trigger ADSL model to connect to Internet automatically
when you are dialing phone number.
IP Address You may fill in IP address here if Fixed IP is selected.
SubNet Mask You may fill in Subnet Mask address here if Fixed IP is selected.
Gateway You may fill in default gateway address here if Fixed IP is selected.
DNS Server1 You may fill in primary DNS server address here if Fixed IP is selected.
DNS Server2 You may fill in secondary DNS server address here if Fixed IP is selected.
PPPoE ID You may fill in PPPoE account ID or name here if PPPoE is selected in IP type
selection.
Password You may fill in PPPoE account password here if PPPoE is selected in IP type
selection.
31

Related product manuals