Web Setup This item allows you enable or disable the Web-User- Interface HTTP
service. Web UI will be not available if disabled.
SIP SERVICES
Phone No. You have to fill in the phone number here. Normally it is provided by
service provider. You can also set an extension number here if connecting
to an IP PBX.
Disp. Name Initial of Display Name. This name will show on the IP phone of called
parties. You may fill in the preferred name here.
Account You may fill in your account name of SIP service here.
Password Fill in the password of your SIP service account here.
Link Mode This item allows you to select the working model of SIP service. Default
setting is Peer-To-Peer.
NOTE: Select “Server” mode if this phone is connected to a SIP server or IP
PBX.
Protocol Select the correct low level communication protocol here. There are 2
options: UDP and TCP. You have to confirm which one the service is using
from your service provider.
NOTE: Default setting is UDP. For most of the protocols that are used are
UDP.
Proxy Fill in IP address or domain name of the SIP Proxy Server in the field.
Registrar You may fill in IP address or domain name of SIP Registrar Server here.
32
To Next Page
Loading...
