What to do if AMS Vending machine displays 'PROD-SENSOR'?
If your AMS Vending machine displays 'PROD-SENSOR', it means the product sensor is blocked or disconnected. You should: * Remove any products or other objects in the bottom, or in sensor openings in ends of the delivery bin. * Check sensor harness connections.
Why does my AMS Vending machine say 'SENSIT BLOCKED'?
The 'SENSIT BLOCKED' error on your AMS Vending machine indicates that the vend sensor is blocked or the lens is fogged. To resolve this, remove any obstructions from the path of the sensor.
What does 'SENSIT DISCONNECTED' mean on my AMS Vending machine and how to fix it?
The 'SENSIT DISCONNECTED' message on your AMS Vending machine means the vend sensor is disconnected. To fix this, check all sensor harness connections.
What does 'X STUCK' mean on AMS 28 Slim Gem and how to fix it?
If your AMS Vending machine displays 'X STUCK', it means that keypad selection button X has been depressed for more than 2 minutes. To resolve this: * Clear any obstructions or dirt from around the selection buttons and make sure they can move freely. * If proper operation is not restored, replace the keypad.
What does 'HOME ERROR' mean on my AMS Vending machine?
The 'HOME ERROR' message on your AMS Vending machine indicates a motor switch problem. You should: 1. Check for correct motor type. 2. Check for proper connections. 3. Check for correct motor set-up.
What does 'CLEAN SCREEN' mean on my AMS Vending machine?
The 'CLEAN SCREEN' message on your AMS Vending machine is not an error. It's a reminder generated by the control board to aid the service person in cleaning the vendor interior.
General| Brand | AMS |
|---|---|
| Model | 28 Slim Gem |
| Category | Vending machines |
| Language | English |
To Next Page
