AMS CT412 - Bluetooth Operations and Music; Device Pairing and Call Handling; Music Playback and Voice Control

EN-8
Bluetooth Functions
2. Dialing via the radio
Press [SRC] button to switch to A2DP
(BT) mode. Press [
5
] to display "DIAL
NUM" on the screen, then press the
volume knob to enter in the dialing mode.
Press the [
/ ] button and rotate
the [volume] knob to insert the numbers,
press [
5
] to exit the menu.
3. You can search for any dialed, missed, or
received call. As previously explained for
the "DIAL NUM" function, select "Dialed",
"Missed" or "Received",
> Press the Volume knob to browse your
history.
> Turn the [VOL] knob to scroll through the
contacts.
> When the contact's name or mobile
phone number is displayed, press the [
5
] button to call the phone number of this
contact. Press the [
6
] button to end
the call.
Call Transfer
During your call, press the [
5
] button to
transfer the call from the radio to your mobile
phone.
Note:
Some mobile phones will transfer the call
from the radio to themselves once the
incoming call has been answered.
Voice commands
In the A2DP mode, you can use voice
commands (SIRI / Google voice / and
Android) to make a phone call from the phone
book or write a message.
“Voice commands” function must be activated
on your telephone and you must avoid noisy
environment.
Music Mode A2DP
On A2DP music playing mode, press the [1]
button to pause/play.
Press [ / ] to go back to the previous
or go to the next track.
In AD2P mode, if your phone is paired you
can order vocally by "SIRI" or "Google "
application to select and give a call.
On some ANDROID versions you can
separate the phone book and the music
management in order to connect two
Bluetooth devices.
1. Standard Setting (one mobile phone and
one media) : you can receive and send a
call while listening to your music.
2. Double connection (2 phones connected at
the same time)
• rst in BT ( receipt and phone call)
• second in A2DP mode (listen to your music)
you can cancel the media connection on the
rst phone.
• on the phone, enter the Bluetooth setting.
• position yourself on the CT412 DAB
INITIAL.
• go to the setting at this device.
• uncheck the setting " audio parameter
Media."
• close the acces parameter CT412 DAB
INITIAL the rst device received an transmit
call, the second device playing the audio
media, to return to standard parametrage,
tick the box of the rst device once having
disconnected the second device.
BT VOL
Adjusts the level of the AD2P-BT relative to
other sourcies (from 0 to +7).