Why is one side of the field of view dark or the image moving while focusing on my AmScope Microscope?
If one side of the field of view is dark or the image moves while focusing, it may be because the specimen is not fixed. Secure the slide to the stage with clips, ensuring the sample doesn't move.
Why is the field of view not bright enough on my AmScope Microscope?
The field of view might not be bright enough due to several reasons: * A light source might not be present; this model microscope requires a light source to view a sample. * The light source may be too dim. Try adjusting the intensity or changing the light source. * Lenses may be dirty. Clean all lenses with lens cleaner and a lint-free cloth.
How to fix an unclear image on my AmScope SM-5?
If you're experiencing an unclear image, it could be due to a few reasons. First, the lens in the inlet of the head might be stained or dusty. Clean it with lens cleaner or a nonabrasive lint-free cloth and compressed air. Alternatively, the microscope head may not be in the correct position for focusing. Adjust the height using the focusing knob until the image appears in focus. Remember that higher magnification requires the head to be closer, while lower magnification needs more distance.
General| Type | Stereo Microscope |
|---|---|
| Head | Binocular or Trinocular |
| Magnification | 3.5X-90X |
| Objective Lens | 0.7X-4.5X |
| Eyepieces | 10X widefield, 20X widefield |
| Working Distance | 100mm |
| Illumination | LED |
| Stand Type | Pillar stand or boom stand |
Essential safety guidelines for handling, operating, and maintaining the microscope to prevent injury and damage.
Step-by-step instructions for unpacking and assembling the microscope and its components.
Identification and solutions for common optical problems encountered with the microscope.
Identification and solutions for common mechanical issues and their remedies.
To Next Page
