Modero S Series G4 Touch Panels
7
Modero S Series Touch Panels - Installation & Hardware Reference Manual
Powering the Panel On/Off
To power the panel on, press the Sleep button.
Note that X Series panels automatically perform a screen calibration at power-up. Therefore, avoid allowing wireless devices near
the screen, as well as touching the screen during the power-up process. These actions may cause the calibration to be off when the
panel is powering up.
Conf iguration and Programming
S Series touch panels are equipped with a Settings menu that provides the ability to configure various features on the panels. To
access the Settings menu, press and hold the Sleep button with a pointed instrument, and select Settings. This opens the main
Settings menu
NOTE: Unlike previous G4 touch panels, Modero S Series touch panels do not have separate Setup and Protected Setup pages. All
touch panel settings and functionality are now controlled through one Settings menu. The Connection & Networks and Configuration
sections are accessible with the correct password.
Accessing the Settings Menu
1. To access the Settings menu, press and hold the Sleep button on the touch panel with a pointed instrument for 3 seconds.
Alternately, some installation circumstances may require disabling Settings page access through the Sleep button. In this
case, you may access Settings pages during a bootup of the panel.
As the panel boots up, watch for a series of indicator dots to appear on the splash screen (FIG. 3).
2. To access the Settings menu, press the bottom right corner of the touchscreen within the first three seconds of these dots
appearing on the screen.
Using the Settings Pages
When opened, the Settings menu appears in the center of the panel display. Note that many of the pages may be longer than they
initially appear. Scroll down to reach all functions on a given page.
Information on the Settings menu, panel configuration, and programming is included in the Modero X Series G4 Programming
Guide, available at www.amx.com.
NOTE: Programming Modero S Series touch panels require the use of the latest versions of NetLinx Studio and TPDesign4, both
available to download at www.amx.com.
Bluetooth Support
S Series touch panels allow the use of Bluetooth keyboard and mouse combinations, using HID Profile v1.1.
Using a keyboard and mouse with the device requires use of the MXA-BT Bluetooth USB Adapter (FG5968-19).
Picture View
By connecting a USB drive via one of the device’s USB ports, Picture View allows the S Series panel to access JPEG images on that
drive and display them on the touchscreen. Individual images may be accessed at any time, or the entire collection may be
displayed for predetermined times.
Picture View may be stopped at any time by removing the USB drive, and the panel will return to its default display page.
NOTE: The maximum source resolution for Picture View is 1920x1920 pixels.The maximum displayed resolution is the same as the
screen resolution.
Sleep Button Functionality
Press/Hold Action Function Initiated on Release
Press Once Puts the panel in sleep mode.
Press Once - while in Sleep mode Wakes the panel from sleep mode
Press and Hold Opens a Popup
Press/hold for 3 seconds Open the panel’s Setup pages
Press/hold for 6 seconds Initiates panel shutdown
Press Once - while panel is shut down Powers on the panel
FIG. 3
Indicator dots on the Modero X Series splash screen
To Next Page
Loading...
Need help?
General
