What does 'No argon pressure (status)' mean on Analytik Jena Laboratory Equipment?
If your Analytik Jena Laboratory Equipment shows a 'No argon pressure (status)' message, it means the gas supply is closed before reaching the device connection. Check the gas supply and ensure you open the gas supply before the gas connection.
What does toroidal transformer temperature error mean for Analytik Jena Laboratory Equipment?
If your Analytik Jena Laboratory Equipment displays a 'Toroidal transformer temperature error (status)' message, it means the transformer temperature is too high. Allow the device to cool down for at least 1 hour. If necessary, reduce the thermal load in the temperature-time program.
What to do if there is a cooling system sensor error on Analytik Jena Laboratory Equipment?
If your Analytik Jena Laboratory Equipment shows a 'Cooling system sensor error (status)' message, it indicates an insufficient filling level of the coolant reservoir. Check the water level in the cooling unit and top up the cooling water if required.
General| Brand | Analytik Jena |
|---|---|
| Model | novAA 800 |
| Category | Laboratory Equipment |
| Language | English |
General safety advice, device symbols, and operating personnel requirements.
Provides safety guidelines for moving and setting up the device.
Covers essential safety measures during the device's operational use.
Procedures to follow in case of hazardous situations or accidents.
Procedures for installing, configuring, and aligning lamps for optimal performance.
Lists error codes and messages with corresponding causes and remedies.
Addresses common equipment issues and implausible analytical results.
To Next Page
