Ananda D10 - Setting Photosensitive Threshold

- 23 -

Batteryinformation
6.8Photosensitivethresholdsetting
After entering the hidden setting, short press "+" button
toswitchbetweenBatteryinformation‐Softwareversion
‐Photosensitivethresholdsetting.
PressPowerbuttonshortlytoenterPhotosensitive
thresholdsettingmode.
Press“+”or“‐”shortlytochangethelevels.
P stands for the photosensitive threshold. Adjust this
parameter to adjust the sensitivity of the automatic
headlightfunctiontoambient light. The higherthe value
is,thelowerthesensitivityis.Theambientlightrequired
to automatically turn on the headlights needs to be
weaker.
PressPowerbuttonagaintosavethechangeandexit