Ananda D10 - Speed, Distance, and Time Display Modes

- 8 -
When switch on, press and hold  the Power button for 2
secondstoturnoffpoweroftheebike.
Whenswitchoff,thedisplaynolongerusesthe battery's
power supply, and the display’s leakage current is less
than1uA.
Thesystemwillautomaticallyshutdownafter10minutes
withoutoperation.

5.2 Speed/Distance （ ODO distance/TRIP distance/Trip
time）
AtstartupthedisplayedmodeisalwaysCurrentspeed
andODOdistance.PressPowerbuttonshortlytoswitch
between:CurrentspeedandODOdistance‐>AVERAGE
SpeedandTRIPdistance‐>MaximumspeedandTRIPtime
IntheAVERAGESpeedandTRIPdistancemodeor
MaximumspeedandTRIPtimemode,pressingand
holdingthe“‐”buttontoresettheAVERAGESpeed,TRIP
distance,MaximumspeedandTRIPtimevalueto0.
ResetisinvalidinCurrentspeedandODOdistancemode.
