Pic 6-2
3. Pas level and Walking Assistant Mode
In the power-on state, click the plus or minus button to switch the electric
vehicle power-assisted gear position and change the motor output power. The default
output power range of the display is 0-5 pas or 0-9 pas (the pas range is adjustable).
Press and hold the minus button to release, it will start Walking Assistant mode, and
the pas level becomes 0. Release the minus button to exit the Walking Assistant mode.
(return to previous pas) The Walking Assistant mode and pas level display are shown
in Pic 6-3: (current pas 1 display and Walking Assistant mode).
During working, long press 2s to turn
on light; long press 2 s to turn off
To Next Page
Loading...
