ANCEL AD410 - Vehicle Info

Select EVAP System Test and press ENTER. the screen will display the
relative information about EVAP system. Some vehicle manufacturers do not
allow External devices to control vehicle system. If the car supports this
func!IOn, it will display as below·
4.2.9 Vehicle Info
Evaporative system leak
test
not supported
Select (Vehicle lnfoj and press ENTER. the screen will display the information,
such as VIN (Vehicle identification Number). CID (Calibration
ID ) and CVN
(Calibration venfication number), as shown below (different cars will shown
different data) :
LCFJD52E76H008345
CI D1 : W0 2211562A 155070
CV N: E95898A6
Press EXIT to return to Diagnostic Menu.
22