ANCEL VD500 - Operation Instructions; Connecting the VD500; VD500 Features Overview

1. Connect VD500
2. VD500 Features
2.1 V / A
Choose [V/A Diagnosis] then press [ENTER] button. The screen will display
as follows:
4
1.1 Turn the ignition on.
1.2 Locate the vehicle's 16-pin Data Link Connector (DLC).
1.3 Main menu
V/ A Diagnosis
OBDII Diagnosis
Review DTC
System Setup
Operation instructions
Main Menu
V/A Diagnosis
OBDII Diagnosis
Review DTC
System Setup
Main Menu
V/A Diagnosis
OBDII Diagnosis
Review DTC
System Setup
V/A Diagnosis
Common system
V/A A11 Systems
Service Reset
Throttle Adaptation
EPB Replace Brake Pads
EN