ANCEL VD500 - Read ECU Information; Read Fault Codes

2.1.1 Read ECU Info
Choose [01-Control Unit Info] then press [ENTER] button. It will display as
follows:
5
2.1.2 Read Fault Codes
Choose [02-Read Fault Codes] then press [ENTER] button. The screen
will display fault codes as below:
Move [up] or [down] button to check fault code.
Trouble Codes
Total Codes ：09
Fault Codes ：09
01--Engine
01--Control Unit Info
02--Read Fault Codes
05--Clear Fault Codes
01--Engine
01--Control Unit Info
02--Read Fault Codes
05--Clear Fault Codes
Part NO: 06G906057G
Component: 2.01 88KW
3311
COD: 0000075
IMP: 666
WSC: 19460
Extra: 01231
EN
Press the following Engine system it will display as below:
Select [01- Engine], press [ENTER] button will enter the engine diagnostic
interface
V/A Diagnosis
01--Engine
02--Auto Trans
03--ABS Brakes
08--Auto HVAC
09--Cent Elect
15--Airbass
Deteoting Protocol
Waiting for vehicle
to respond
TP2.0_CAN