6
BATTERY INSTALLATION
1. Remove the battery compartment cover (located below the back panel of the Mini) by
pressing down the lock tabs at the top of the cover.
2. Slide out the battery pack from the Mini battery compartment. Do not pull any wires
attaching the battery pack to the speaker.
3. Insert 10 AA-sized batteries (alkaline or the rechargeable batteries provided with RC-30
recharge kit) into the battery pack. Follow the polarity labels on the battery pack for
correct positioning. NOTE: The battery pack is double sided.
4. Slide the battery pack into the battery compartment. Be sure to push the battery pack
all the way in to the system.
5. Replace the battery compartment cover and push the cover to lock it in place.
RECHARGEABLE BATTERY KIT (Optional Accessory)
When frequently using your Mini, we recommend using the RC-30 Rechargeable Battery
Kit. This kit includes 10 Nickel-Metal Hydride (NiMH) rechargeable batteries and an AC
Charging adapter. When fully charged, these batteries provide 10-12 hours of power for
your system. With Anchor Audio’s battery and energy management features, one hour of
charging equals one hour of playtime. NOTE: New batteries must be charged for 6 hours
prior to first use.
Using the RC-30 Recharge Kit
1. Install the 10 rechargeable NiMH batteries into the Mini (see- Battery Installation above)
2. Insert the charger plug into the Input Jack labeled DC IN on Mini back panel.
3. Plug the AC adapter into a power outlet for 4-6 hours to fully charge
Cycling the Batteries
For extended battery life, we recommend you fully charge the batteries once each month
during periods of infrequent use. Always fully recharge batteries before storing.
CAUTION: NEVER recharge other types of batteries. Doing so can result in battery
explosion. Only use rechargeable Nickel-Metal Hydride (NiMH) batteries.
RC-30 Rechargeable Battery Kit
To Next Page
Loading...
Need help?
General
