Andamiro SpongeBob Squarepants VR Bubble Coaster - Step 9 - Tying up the LED Cables to the Sound System Cable

13
STEP 9 – TYING UP THE LED CABLES TO THE SOUND SYSTEM
CABLE
FIGURE 1 – With the zip tie, tie both wires together.
FIGURE 2 - Ensure both cables are securely tied down before pulling the wind system
cable.
FIGURE 3 - On the back of the back display, pull the wind cable through the pipe so that
the LED cables come together.
FIGURE 4 - Ensure the LED cables run entirely through the pipe.