Andamiro SpongeBob Squarepants VR Bubble Coaster

To Next Page

To Previous Page

FIRST STEPS 4

Step 1 – Unpacking your Coaster 4

Step 2 – Removing the support pipes 5

Step 3 – Removing the BLACK-DISPLAY 6

Step 4 - Installing the support pipes 7

Step 5 – Installing the back-display on the simulator base 8

Step 5.1 – Adjusting the Pipes Position 9

Step 6 – Opening the back-display door and seat 10

Step 7 – Inserting the cable through the internal back-display pipe 11

Step 8 – Tools required to attach the wind system cable to the LED cables 12

Step 9 – Tying up the LED cables to the sound system cable 13

Step 10 – Cutting the zip tie 14

Step 11 – Connecting the LED cables to the power 15

Step 12 – Inserting the cable through the internal back-display pipe 16

Step 13 – Pulling the wind system cable to the base connector 17

Step 14 – Connecting the wind system cable 18

Step 15 – Connecting the payment system cable 19

Step 16 – Inserting the power cable through the internal back-display pipe 20

Step 17 – Connecting the power cable to the power outlet 21

Step 18 – Connecting the sound cable to the base 22

Step 19 – Closing the seat 23

Andamiro SpongeBob Squarepants VR Bubble Coaster - First Steps