To Next PageTo Next PageWhy is my Anden A320V3 producing hot air?
It's normal for the Anden Dehumidifier to produce hot air. The air is reheated as it passes across the condenser coil, which causes the temperature to rise between the inlet and outlet.
How to fix Anden Dehumidifier blower running but with little or no airflow?
If your Anden Dehumidifier blower is running with little to no airflow, you should: * Check the dehumidifier's air filter and replace it if needed. * Inspect the ductwork for any blockages and clear them. * Make sure that the outlet collar with backflow damper is installed on the outlet side of the dehumidifier. * Check the backflow damper for any obstructions or if it's stuck, and remove any blockage.
General| Model | A320V3 |
|---|---|
| Moisture Removal Capacity | 320 pints per day |
| Voltage | 115V |
| Power Supply | 115V/60Hz |
| Refrigerant | R410A |
| Dimensions | 25.2" x 25.2" x 48.9" |
| Weight | 105 lbs |
| Auto Restart | Yes |
| Continuous Drainage | Yes |
| Warranty | 5 years |
