EasyManua.ls Logo

Anden A200V1 - User Manual

Anden A200V1
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SAFETY INSTRUCTIONS
WARNING
1. High voltage may cause serious injury from electric shock. Disconnect electrical power before starting installation or servicing. Leave power
disconnected until installation/service is completed.
2. Sharp edges may cause serious injury from cuts. Use care when cutting plenum openings and handling duct work.
3. Dropping may cause personal injury or equipment damage. Handle with care and follow installation instructions.
CAUTION
1. Read all instructions before beginning installation.
2. Improper installation may cause property damage or injury. Installation, service, and maintenance must be performed by a qualified service
technician.
3. Do not use in pool applications. Pool chemicals can damage the dehumidifier.
4. Wait 24 hours before running the unit if it was not shipped or stored in the upright position
READ AND SAVE THESE INSTRUCTIONS
Model A200V1, A300V1, A300V3
Dehumidifier
Installation and Operating Instructions
1

Questions and Answers

  • D
    David WhiteAug 11, 2025
    Why is my Anden Dehumidifier not turning on?
    • P
      Peggy WilsonAug 11, 2025
      If your Anden Dehumidifier isn't turning on, there could be a few reasons: * **No power to the unit:** Check the wiring to the dehumidifier and ensure it's properly connected. * **Control is off:** If you're using a Model A76, make sure the control is turned ON. * **Circuit breaker:** Verify that the circuit breaker hasn't tripped.
  • T
    Tony CollinsAug 21, 2025
    What to do if my Anden A200V1 is not draining properly?
    • C
      Chad HarrisAug 21, 2025
      If your Anden Dehumidifier isn't draining correctly, here are a few things to check: * **Unit Level:** Make sure the unit is level. * **P-trap:** Verify that the p-trap is installed correctly and primed. * **Drain Line:** Inspect the drain line for any blockages and ensure it has a continuous downward slope.
  • E
    Emily MooreAug 30, 2025
    Why is my Anden Dehumidifier producing hot air?
    • D
      dannydeanAug 30, 2025
      The Anden Dehumidifier produces hot air as a normal function. Air is reheated across the condenser coil, which causes a temperature increase between the inlet and outlet.

Anden A200V1 Specifications

General IconGeneral
BrandAnden
ModelA200V1
TypeDehumidifier
Water Removal200 Pints per Day
Capacity200 Pints/Day
Dehumidification Capacity200 pints per day
DrainageGravity Drain
Humidity ControlDigital
Tank CapacityN/A (designed for continuous drainage)

Related product manuals