OptiBean (XL)
50
2013/08 Rev. 0.5
OptiBean (XL)
GB
51
2013/08 Rev. 0.5
Service menu continued ...
Main item Sub-item Item Description
2.8 read log
Last 20 error messages including time and date will be saved
2.9 Erase log
Are you sure? Log will be erased
2.10 Load defaults
# See Section 4
Models and recipes
Are you sure?
Model #
OB2
OB3
OB2 variant
OB2 variant
OB3 variant
OB3 variant
OB3 variant
OB3 variant
OB3 variant
OB3 variant
Type code
2B1A xx00
2B2A xx00
2B3A xx00
2B4A xx00
2B5A xx00
2B6A xx00
2B7A xx00
2B8A xx00
2B9A xx00
2BAA xx00
The defaults must be loaded when a new circuit board is installed.
When loading the defaults, the OptiBean model stated on the type
plate must be set. Only after con rming the question ‘are you sure?’
the right model settings will be loaded.
Note;
When you con rm this setting, all factory settings are loaded into
the control and all changed programmed values are lost.
After loading the defaults, the PIN code is 2-2-2-2-2 again and the
language is set to English again. Change as necessary.
2.11 SD menu
Before loading
or saving data,
place an empty SD
memory card in the
card reader.
This is located
behind the stainless
steel panel on the
inside of the door.
Load data
Memory Card
Personal
settings
With this menu item Personal settings can be loaded into the
machine using an SD memory card (uploaded).
This le contains the (changed) personal settings for the menus; 2.4
Settings / 2.6 Service boiler / 2.13 Additional settings.
The data le (2Bxxxx00.MDU) must be on the SD card.
Language
With this menu item, a non-standard language set can be loaded
into the machine. The data le (xxxxxx.TLF) must be on the SD card.
Recipe
With this menu item Personal recipes can be loaded into the
machine using an SD memory card (uploaded).
This le contains the (changed) personal recipes for the menus; 2.1
Quick recipe / 2.2 Button settings / 2.3 Recipe settings. The data
le (2Bxxxx00.RCU) must be on the SD card.
Counters
With this menu item Recipe counters can be loaded into the ma-
chine using an SD memory card (uploaded).
There must be a data le (2Bxxxx00.CNT) on the SD card.
This le contains all recipe counters from the 1.3 Recipe counters
Use this function only when, for example, a new control must be
installed in the machine and the counters must be ‘moved’ from the
old control to the new one. Do not misuse this function!
Operating hours
With this menu item Operating hours can be loaded into the ma-
chine using an SD memory card (uploaded).
There must be a data le (2Bxxxx00.TMR) on the SD card.
This les contains all the operating hours from the menu 2.7 Hard-
ware test / operating hours.
Use this function only when, for example, a new control must be
installed in the machine and the counters must be ‘moved’ from the
old control to the new one. Do not misuse this function!
Service menu continued ...
Main item Sub-item Item Description
2.11 SD menu
(continued....)
Save data
Memory Card
Personal
settings
With this menu item Personal settings can be saved on an SD
memory card and/or copied to another machine.
All changed settings made in the menus; 2.4 Settings / 2.6 Service
boiler / 2.13 Additional settings are saved in a data le (2Bxxxx00.
MDU) on the card.
Recipes
With this menu item Personal recipes can be saved on an SD
memory card and/or copied to another machine.
All changed settings made in the menus; 2.1 Quick recipe pro /
2.2 Button settings) / 2.3 Recipe settings are saved in a data le
(2Bxxxx00.RCU) on the SD card.
Counters
With this menu item Recipe counters (personal recipes) can be
saved on an SD memory card.
All counter readings from the menu; 1.3 Recipe counters are saved
in a data le (2Bxxxx00.CNT) on the SD card.
Note; after the counters have been saved you will be asked if the
counters in the machine must be reset. Press Esc. (X) for NO, press
Enter (V) for YES.
Log
With this menu item the Log (error messages overview) can be
saved on an SD memory card.
All error messages from the menu; 2.8 Read log are saved in a data
le (2Bxxxx00.LOG) on the SD card.
Note; Depending on your settings, Windows can see this le as a
TXT le.
Operating hours
With this menu item the Operating hours can be saved on an SD
memory card.
All operating hours from the menu; 2.7 Hardware test / Operating
hours are saved in a data le (2Bxxxx00.TMR) on the SD card.
Note; after the operating hours have been saved you will be asked
if the counters in the machine must be reset. Press Esc. (X) for NO,
press Enter (V) for YES.
2.12 Change PIN
code
New PIN code Repeat PIN code With this menu item the PIN code can be changed. Use only the
keys 1 to 4. The complete service menu is secured behind this PIN
code. This PIN code prevents unintentional changes to the machine
settings by untrained personnel.
The factory PIN code is 2-2-2-2-2
PIN code forgotten?
In the PIN code input display (operator menu item 1.7) a number is
displayed on the right. Enter the associated PIN code (see the list
below) to access the service menu.
1JODPEF
Pin Code Table
No. Pin code No. Pin code No. Pin code
1 34242 8 23241 1521211
2 31434 9 24323 1612233
3 41343 10 31332 1734144
4 43232 11 13332 1841433
5 23341 12 12413 1931241
6 42131 13 43121 2022324
7 2 4 2 4 4 14 1 1 1 4 2
To Next Page
Need help?
General
