Solar Panel Recharging (100W Max)
Recharge your power station with a maximum solar input of 100W by connecting up to one Anker 100W/60W Solar Panel
as shown in the figure with a solar charging cable.
The voltage of the solar panel should be 11V-28V, otherwise it will damage the power station.
C1:15W C2:140W C3:140W
A:12W
C2:140W
The solar charging cable is sold separately.
USB-C Recharging (140W Max)
Recharge your power station by connecting to a wall adapter with a USB-C cable.
USB-C recharging and XT-60 recharging cannot be used simultaneously.
C1:15W C2:140W C3:140W
A:12W
USB-C cables are sold separately. Use a 140W USB-C cable and 140W adapter for the best charging experience.
To Next Page
Loading...
