Uninterruptible Power Supply (UPS)
To use the UPS feature, connect your power station to a wall outlet with the AC charging cable, then press the AC outlet
button and connect your devices via the AC output ports. UPS supports 10ms.
C1:15W C2:140W C3:140W
A:12W
1
2
3
SurgePad™
Anker SOLIX C300 Portable Power Station supports the SurgePad™ feature for up to 600W AC output.
SurgePad™ automatically turns on when the total output exceeds the rated output, allowing the power station to deliver
rated power to high-wattage devices.
SurgePad™ does not function in bypass mode (when the power station is being charged with the AC output on).
SurgePad™ works better with devices that generate heat, but does not support precision instruments and other devices
that have voltage protection or strict voltage requirements. To see if SurgePad™ works with your high-wattage devices,
try powering them with the power station.
To Next Page
Loading...
