Anker SOLIX C300 - Page 9

LCD Screen Guide
2
1
4
3 6 7
9
12
13
5 8
11
10
1
Press the IoT button once to turn on Bluetooth and Wi-Fi, and connect your devices through the app when this icon
appears on the screen.
Press the IoT button for 2 seconds to turn o Bluetooth and Wi-Fi.
Press the IoT button for 7 seconds to reset Bluetooth and Wi-Fi.
2
AC Charge and Voltage Frequency
3
Low-Temperature Alert: When this icon shows, stop using the power station until the icon disappears.
4
Overload Warning:
This icon appears when a port is overloaded. The port will be turned o to avoid any damage. Please remove the device
causing overload.
5
High-Temperature Alert:
When this icon shows, stop using the power station and let it cool down until the icon disappears.
6
USB-C Input/Output Port
7
USB-A Output Port
8
Car Charging