EasyManua.ls Logo

anko FH218A-B - Product Specification; Assembly and Operation

anko FH218A-B
6 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
36. For cleaning, please refer to the "Cleaning and Maintenance" section.
WARNING: Do not use this heater in small rooms when they are occupied by persons
not capable of leaving the room on their own, unless constant supervision is
provided.
WARNING: To reduce the risk of fire, keep textiles, curtains, or any other flammable
material a minimum distance of 1m from the air outlet.
PRODUCT SPECIFICATION
Power Input: 1800‐2000W
Voltage Input: 220‐240V~ 50Hz
PACKAGE CONTENTS
1 Main Unit 1 Instruction Manual
NOTE: Confirm all parts before disposing of carton. Safely dispose of all plastic bags
and other packaging components. They may be potentially dangerous to children.
ASSEMBLY AND OPERATION
•Ensure the ON/OFF control is in OFF (position 0”) position before
connecting to mains power.
Make sure the plug and cord are not damaged in any way.
Insert the plug into a wall socket with correct power output,
220‐240V AC 50Hz.
Turn ON/OFF switch to either:
‐ “ ” for Fan Only
‐ “I” for Low Heat
‐ “IIfor High Heat
NOTE: When the heater is switched ON, the red power indicator light will
turn ON (make sure to turn the temperature control setting pass the midpoint,

Related product manuals