Page 12 of 16
6.3 Indicator Lights
• When first plugged in and switched on, the On/Off button will illuminate
Red indicating power is supplied.
• With the Water Tank filled and fitted to the base, and after selecting your
desired mode, the On / Off button will illuminate Blue indicating all is
working properly.
• If the water tank is not fitted, or if the water has been consumed, the unit
will turn Off and the On / Off button will Flash Red indicating that the water
tank is not fitted, or has run out of water.
7 After Use
• When finished using, the water tank must be emptied and the water in
the base unit be tipped out.
• Before removing the water tank, switch off and unplug the Power
Supply from the appliance and power point first.
8 Care and Cleaning
Important: Switch off and unplug the Power Supply from the appliance and
power point first before cleaning.
8.1 Ultrasonic Transducer
The Ultrasonic Transducer is what creates the mist and will need cleaning
occasionally.
IMPORTANT: Never touch the transducer with your fingers as the residue
from your skin will damage the unit.
The Ultrasonic Transducer is located in the bottom of the water trough as
shown.
To Next Page
Loading...
