DESCALE CYCLE
When the steam generator operates, there is
an accumulation of limestone inside because
of calcium content in the water. Periodic
descaling of residual build-up can increase
the life span of your Oven and prevent any
decline in performance.
Descaling is recommended after 30hours of
steam usage. The automated Descale cycle
takes about 40minutes to complete.
You will need a descaling solution and water
to perform this cycle.
figure 2: pan placement during descaling
NOTE: Distilled water is recommended to help
maintain correct operating function.
Anova_Oven_Guide_INTL_08032023.indd 20Anova_Oven_Guide_INTL_08032023.indd 20 8/9/23 5:24 PM8/9/23 5:24 PM
To Next Page
Loading...