Anova PRECISION OVEN - Page 21

21
DESCALE CYCLE
DESCALING STEPS
1. Remove all accessories. Put the solid pan
on the bottom of the cavity so that the
Descale drain outlet is protruding out
over the edge of the tray to catch liquids.
See fig. 2.
2. Remove and empty the water tank, then
reattach to the oven.
3. Mix 3/4 Cup (about 200mL) descaling
solution with 1L (1 Quart) water, and
pour into the Water Tank.
4. Activate the Descale cycle by pressing
the   on the Display
or in the App. The first phase is about
30minutes.
5. After the end of the first stage, make sure
there is no remaining cleaning solution
inside the Water Tank. If there is, remove
the tank, empty the solution, rinse the
tank with water, and reattach.
6. Add 1L (1 Quart) distilled water to the
Water Tank.
7. Activate the second phase of the cycle by
pressing the   on the
Display or in the App. The second phase
is about 10minutes.
8. When the cycle is complete, remove the
solid pan and clean the pan.
9. Wipe away any moisture inside the Oven
with a dry cloth. Let it dry fully with the
door open.
Anova_Oven_Guide_INTL_08032023.indd 21Anova_Oven_Guide_INTL_08032023.indd 21 8/9/23 5:24 PM8/9/23 5:24 PM