13
It does not turn on No current
Confirm that the power cord is
properly connected to the charger
and that the charger is connected
to a suitable power source.
Green light on
The perimeter wire is connected
to the right; the robotic
lawnmower is fully charged
NA
Flashing green light
The robotic lawnmower is
charging correctly
NA
Flashing red light
Perimeter wire is not connected
Perimeter wire is broken
Check that the two ends of the
perimeter wire are connected
correctly.
Check that the perimeter wire is
Installation check
• Set the cutting height to its maximum level (60 mm) for the first cut.
• Place your robotic lawnmower inside the work area, work for a while, then check the
perimeter wire properly.
• Check if the robotic lawnmower returns to the charging station along the perimeter wire.
• If it returns to the charging base successfully, the installation has been completed
successfully.
To Next Page
Loading...