8
4. TECHNICAL DATA
Model RC500 (RMA501M20V)
Cutting area 500m
2
Voltage 20V max.
No load speed 2800rpm±100rpm
Cutting diameter 180mm
Cutting height 20-60mm
Height-of-cut positions 9
Maximum angle for the work area 36% (20°)
Narrowest passage possible 0.8m
Battery type/model 2.5Ah Li-Ion
Charger time 120-140min
Charger Rating
Input: 100-240V 50/60Hz, 28W
Output:20.5V--1.1A(IP67)
Noise (sound power)
(2000/14/EC modified by 2005/88/EC, Annex V)
<62dB
Weight 8kg
Perimeter wire 130m
Wire pegs 180pcs
Blades 3pcs
Charging cradle 1 (RC500-01 / CB03A)
Batteries 1 (LBF2025)
Charger 1 (CGF251)
Robot protection IPX5
Charging station protection IPX4
Power supply protection IP67
Apps Wi-Fi 2.4G + Bluetooth 4.0
Clarifications:
• Not all accessories that are described in this manual have to be included in the final
delivery of the product due to product updates.
• Measured no-load voltage: The initial battery voltage reaches a maximum voltage of 20
volts. The nominal voltage is 18 volts.
• We recommend that you purchase the original accessories from the same store that sold
To Next Page
Loading...