according to vendor's Package Includes description. If anything is missed
or damaged, please contact us.
②A test run
The cameras require mounting and power cabling in some situations. To
save your time and make sure all devices work well, we suggest a test
run of all devices IN THE SAME PLACE before installation. Follow the
steps in section 6 to run the system. If everything works well, you can
then go ahead and mount cameras to where you want. If there is any
exception, please contact ANRAN support or your vendor.
6. Setup the System for Live View
① Preparation:
1. The ANRAN camera system.
2. A monitor or a TV.
3. A VGA cable or an HDMI cable. (Many monitors/ TVs have them as
standard accessories)
4. A router for Internet connection.
②Steps to setup the system
Please connect the camera systems as pictured below.
To Next Page
Loading...