Need help?Do you have a question about the Anran DVR Kit and is the answer not in the manual?
General| Hard Drive Interface | SATA |
|---|---|
| Hard Drive Capacity | Up to 6TB |
| Recording Resolution | 1080P/720P |
| Motion Detection | Yes |
| Video Compression | H.264 |
| Operating System | Embedded Linux |
| Video Output | HDMI, VGA |
| Network Interface | RJ45 |
| Power Supply | DC 12V |
| Operating Temperature | -10°C to 55°C |
| Humidity | 10% ~ 90% |
| Video Input | 4/8 channels |
Follow the visual guide to connect the camera systems for initial setup.
Configure a secure password for system access and privacy protection.
Download and install the 'Danale' mobile app to add your cameras.
Download and install the 'Danale'CMS software for PC viewing.
Kits with preinstalled HDDs record automatically; verify drive formatting.
Install and format a SATA hard drive for recording functionality.
Set recording parameters including channel, length, and recording mode.
Define specific time intervals for continuous video recording.
Configure recording to activate only when motion is detected.
Search for recorded video files and play them back via the interface.
Set up email alerts for events such as motion detection.
To Next Page