Anritsu MS2690 - Page 1042

Chapter
３
Native Device Message List
3-16
Table 3.8-1 Trace setting messages (Cont’d)
Function Command Query Response Remarks
Write and Query Trace Data
(Trace A)
XMA wpoint,data XMA? start,number
data1,data2,...
wpoint
: Data writing position
start
: Readout starting position
number
: Data count to be read
data
: Level data
* When the detection mode is
Normal, only Positive detection
data is targeted.
Write and Query Trace Data
(Trace B)
XMB wpoint,data XMB? start,number
Write and Query Trace Data
(Trace C)
XMC wpoint,data XMC? start,number
Write and Query Trace Data
(Trace D)
XMD wpoint,data XMD? start,number
Write and Query Trace Data
(Trace E)
XME wpoint,data XME? start,number
Write and Query Trace Data
(Trace F)
XMF wpoint,data XMF? start,number
Write and Query Trace Data
(Gate View)
XMZ wpoint,data XMZ? start,number
Write and Query Trace Data
(Trace A)
SMA wpoint,data SMA? start,number
data1,data2,...
wpoint
: Data writing position
start
: Readout starting position
number
: Data count to be read
data
: Level data
* When the detection mode is
Normal, only negative detection
data is targeted.
Write and Query Trace Data
(Trace B)
SMB wpoint,data SMB? start,number
Write and Query Trace Data
(Trace C)
SMC wpoint,data SMC? start,number
Write and Query Trace Data
(Trace D)
SMD wpoint,data SMD? start,number
Write and Query Trace Data
(Trace E)
SME wpoint,data SME? start,number
Write and Query Trace Data
(Trace F)
SMF wpoint,data SMF? start,number
Write and Query Trace Data
(Gate View)
SMZ wpoint,data SMZ? start,number