To Next PageTo Next Page
Need help?Do you have a question about the Anritsu Field Master Pro MS2090A and is the answer not in the manual?
General| Frequency Range | 9 kHz to 54 GHz |
|---|---|
| Battery Life | Up to 4 hours |
| RBW (Resolution Bandwidth) | 1 Hz to 10 MHz |
| VBW (Video Bandwidth) | 1 Hz to 10 MHz |
| Amplitude Accuracy | ±0.5 dB |
| Storage Temperature | -20°C to +70°C |
| DANL (Displayed Average Noise Level) | -174 dBm/Hz |
| Interfaces | USB, Ethernet, HDMI |
| Operating Temperature | -10°C to +50°C |
Overview of the manual, its scope, and related documentation.
Details the features, capabilities, and available models/options of the instrument.
Guides on maintaining the instrument, ventilation, and connector care.
Details factory calibration and recommends annual performance verification.
Provides contact details for Anritsu sales and service.
Introduces the chapter and its content on instrument features and panels.
Details the components and layout of the instrument's front panel.
Describes the various physical IO connectors on the instrument's top and side panels.
Explains the use and deployment of the instrument's tilt bail stand.
Covers battery charging, replacement, and recommended maintenance.
Provides instructions for powering the instrument on and off, and LED indicators.
Explains the main display areas and their functions within the instrument's GUI.
Describes how to choose and load different analyzers from the instrument's interface.
Details the instrument's System menu options: Information, Settings, Files, Diagnostics, Tools, Power.
Provides access to all instrument system-level settings like display, network, and time.
Manages instrument files, including screenshots, setups, and logs.
Accesses instrument diagnostics like battery info, event logs, and self-tests.
Provides access to various instrument tools like WEB browser, IQ Streaming, Map Tool, and PDF Reports.
Introduces instrument messages, their types, and troubleshooting procedures.
Lists sample self-test results, indicating pass/fail conditions for system components.
Lists notifications related to file operations like cannot access, no write permission, or no space.
Lists informational messages regarding status, progress, and general operation.
Lists warning messages for conditions like ADC overrange, battery fault, or insufficient transfer speed.
Lists error messages indicating issues like antenna disconnection, command errors, or hardware communication problems.
Provides procedures for recovering the instrument from boot failures or software faults.
Guides on configuring Windows Defender Firewall for the UDP Discovery Tool.
Explains how to remotely reset the instrument or manage SCPI connections via TCP port 8001.
Outlines the two main steps for upgrading software on the MS2090A.
Details how to export the instrument's configuration file to Anritsu.
Explains how to install software options using a file or from the web.
Provides instructions for updating the instrument's software using a USB memory device.
Introduces the remote user interface software for PC connectivity.
Lists the system requirements for running the MS2090A PC software.
Provides step-by-step instructions for installing the MS2090A PC software.
Explains how to connect the PC software to the instrument or to the localhost.
Describes the PC software's System menu and its options.
Details how to use the PC software when connected to localhost, including caveats and data analysis.
